Steps for entering the drinks industry with a new brand

Steps for Entering the Drinks Industry With a New Brand

Richard Horwell Press

The steps for entering the drinks industry with a new brand are not complicated. But they are sequential, they are demanding, and skipping any one of them almost always produces the same result: a product that should have succeeded, with a founder who ran out of time, money, or both before it did.

At Branding Innovations, we have guided over 200 founders through every stage of this journey over 20+ years. We have seen the patterns of success and failure repeat consistently enough to state them with certainty.

As newcomers to the drinks industry, founders rely on a deep understanding of recipe development, branding, and product marketing to navigate how buyers and distributors operate. A straightforward, no-nonsense approach allows brands to go from concept to distribution in just six months, showing just how clear and efficient the process is when done correctly.

This article gives you the complete, honest, sequenced guide to entering the drinks industry with a new brand in 2026.

Why the Drinks Industry Is Both an Opportunity and a Test

The global functional beverage market reached $163.84 billion in 2026 and is forecast to grow at a 7.93% CAGR through 2031. The UK sits at the heart of this growth one of Europe’s most active markets for new drink brand launches, functional innovation, and clean-label product development.

The beverage industry is experiencing unprecedented innovation. Functional drinks, clean-label formulations, and category-blurring formats are reshaping consumer expectations. Execution matters more than ever.

But the opportunity comes with a clear statistical warning. Only one in ten new food and drink brands survives beyond two years. The brands that do survive share one characteristic: they followed the right steps, in the right order, without cutting corners at any stage.

The drinks industry has faced an array of complex challenges over the last year. While the economic situation has proved cumbersome for businesses, some immensely creative and trend-setting innovations have emerged. The brands that succeed combine creative product vision with operational discipline.

The steps below are the discipline part.

Step 1: Understand the Market Before You Fall in Love With Your Idea

This is the step that separates the founders who succeed from those who spend their savings proving a gap that does not exist.

Every successful beverage company begins with a solid plan. Define your specific beverage industry category to identify brands you will compete with for market share. Narrow your focus from broad categories such as non-alcoholic beverages to specific niches such as non-alcoholic canned spritzes. This helps determine your beverage’s unique selling point. Your market research should include a SWOT analysis to better define strengths, weaknesses, opportunities, and threats.

Market research for a new drink brand in 2026 must cover four specific areas:

Category size and growth trajectory. Is the category you are entering growing, flattening, or declining? A new functional water brand entering a growing category has a structural tailwind. A new carbonated soft drink brand entering a declining category is fighting gravity from day one.

Competitive landscape at your price point. Who is already competing for the consumer and the shelf space you want? What do they do well? What do they not do at all? The gap you occupy must be genuine — not a gap you imagine exists because you have not looked closely enough at what is already there.

Consumer behaviour and occasion mapping. Who buys drinks in your category? When, where, and why? What does their current drink choice not give them that your product can? A consumer insight that is specific and behavioural is the foundation of a brand story that resonates.

Retailer and buyer landscape. Which retailers stock your category? Which buyers make those decisions? What do they look for in a new brand — and what evidence do they require before listing? Understanding the buyer’s perspective before you build the brand shapes every commercial decision that follows.

At Branding Innovations, Dr. Lilla Bessenyei, our specialist in functional and wellness ingredients, leads this research stage. Her category expertise and ingredient knowledge identify genuine commercial opportunities before a single formulation decision is made.

Step 2: Define a Genuine Point of Difference

Starting a beverage brand in 2026 requires equal parts creativity and operational discipline. The market rewards brands that understand their consumers, deliver genuine functional benefits, and execute flawlessly on the fundamentals. Success depends less on having a revolutionary idea and more on executing consistently.

A point of difference is not “better tasting” or “more natural.” Those are category claims that every competitor makes. A genuine point of difference is specific, evidenced, and ownable, a reason the consumer would choose your brand over every existing alternative at your price point.

The most commercially durable points of difference in the UK drinks market in 2026:

Functional specificity — not “supports health” but “supports sustained cognitive focus through a specific combination of lion’s mane, L-theanine, and natural green tea caffeine at clinically referenced doses.”

Occasion ownership — the drink that owns the post-workout recovery moment, the alcohol-free dinner party occasion, or the 3 pm energy slump, better than anything currently available.

Ingredient provenance — a specific, traceable origin story tied to specific ingredients that no competitor can credibly replicate.

Consumer group specificity — women over 40, professional athletes, new parents, shift workers. A brand built for a specific under-served consumer group with a specific under-served need has natural precision in every marketing decision that follows.

The point of difference must be defined with precision before formulation begins, before branding begins, and before any money is spent on production.

Step 3: Develop the Recipe for Commercial Production

This is one of the most important and most frequently underfunded steps in the entire brand development process. Founders spend money on branding, on social media, on packaging — and then underinvest in the recipe that sits at the foundation of all of it.

A commercially viable recipe must achieve several things simultaneously that a kitchen recipe does not need to:

  • The flavour profile must survive heat treatment, carbonation, pH adjustment, and multiple production batches consistently and identically every time
  • Every ingredient must be verified as approved for UK commercial use under Novel Foods regulations
  • The formulation must be nutritionally analysed to the standard required for UK packaging labelling
  • The recipe must specify the exact quantities that a co-packer can reproduce at an industrial scale

Recipe development is the most critical step in launching your beverage company. Your drink must taste appealing to diverse palates and be replicable at scale. Whether you have been experimenting at home or starting fresh, you need a commercially viable recipe before approaching a co-packer.

At Branding Innovations, our recipe development team is led by Claire, with 40 years of commercial formulation experience working alongside Dr. Lilla Bessenyei for any formulation involving functional, adaptogenic, or wellness ingredients. We build every recipe for the factory environment from the start, preventing the costly reformulations that happen when a kitchen recipe fails at production scale.

Critical formulation considerations for 2026:
Formulation AreaWhat Must Be Confirmed
Novel Foods complianceEvery ingredient is checked against the FSA Novel Foods catalogue before finalising
HFSS classificationSugar, fat, and salt profiles confirmed against the nutrient profiling model
Health claimsEvery on-pack claim is mapped to the retained EFSA health claims register
Shelf-life stabilityStability testing confirming ingredient integrity across the full commercial shelf life
Production scalabilityThe formula is reproducible identically at industrial batch quantities
Allergen profileAll 14 major allergens are identified and declared under Natasha’s Law

Step 4: Navigate Regulatory Compliance From the Start

Regulatory compliance is not a final-stage gate. It is a continuous process that shapes every formulation and labelling decision throughout development.

From January 2026, HFSS products face dramatically tighter restrictions, including a pre-9 pm watershed ban on TV advertising and a complete ban on paid online advertising. Products scoring 1 point or above under the Nutrient Profiling Model are classified as HFSS.

The HFSS rules represent the most significant regulatory change for new UK drink brands in 2026. But they are one of several overlapping regulatory requirements that must all be addressed simultaneously.

The complete regulatory checklist for entering the drinks industry in 2026:

RegulationRequirementConsequence of Non-Compliance
Novel Foods (FSA)Pre-market authorisation for any ingredient not widely consumed pre-1997Illegal to sell — product withdrawal
EFSA Health Claims RegisterOnly approved claims permitted on-packMisleading label — enforcement action
HFSS Advertising RulesComplete ban on paid online ads for qualifying products from January 2026Significant marketing channel loss
Soft Drinks Industry LevySugar content above 4g/100ml triggers levyAdditional per-unit cost
Caffeine LabellingWarning required above 150mg caffeine per litreNon-compliant label — retailer rejection
Natasha’s Law (PPDS)Full allergen declaration for all pre-packed productsLegal liability — retailer rejection
Extended Producer ResponsibilityPackaging material compliance reportingFinancial penalties
BRCGS Co-packer CertificationRequired by all major UK retailersListing refusal from all major grocery multiples

Check every ingredient and every label claim before production begins. We incorporate all of these checks into the development process at Branding Innovations — finding a compliance problem during development costs a fraction of finding one after production.

Step 5: Build the Brand That Earns the Purchase

82% of highly emotionally engaged consumers always buy the brand they are loyal to — compared to 38% of consumers with low emotional engagement. Emotional connection is the ultimate objective of brand building. A consumer who feels something when they see your product — trust, aspiration, recognition, pride — is not making a rational decision. They are making a habitual one.

The brand is the complete commercial system — positioning, name, visual identity, packaging, tone of voice, and story — that communicates who the drink is for and why it is different, in every environment the consumer encounters it.

Building the brand correctly requires completing Steps 1–3 first. The brand is built on the market research, the point of difference, and the formulation, not in parallel with them.

A complete brand build for a new drink brand in 2026 covers:

Naming and trademark. A short, distinctive, phonetically accessible name checked against the Intellectual Property Office trademark database and confirmed as available as a .co.uk and .com domain before any design work begins.

Visual identity. Logo, colour palette, typography, and brand guidelines — built for the full range of applications from a 250ml can label to a 200-pixel social media thumbnail.

Packaging design. Primary and secondary packaging artwork that communicates the brand’s full proposition in two to four seconds on a retail shelf. Production-ready files that meet UK labelling requirements.

Brand voice. Tone of voice guidelines, on-pack copy, and brand messaging that carry the brand’s personality consistently across every touchpoint.

Our brand development services at Branding Innovations integrate every one of these elements built simultaneously with the product development, not after it.

Step 6: Find the Right Co-Packer and Produce the First Run

Your co-packer is the manufacturer who produces your drink at a commercial scale. Choosing the wrong one is one of the most expensive mistakes a new drink brand makes.

As a new beverage brand, you need to connect with 3–5 potential co-packers to understand minimums and capabilities. Model your unit economics at different volume tiers. The investment scale depends on the complexity of the product, manufacturing capacity, and whether co-manufacturers are involved.

The specific questions to evaluate in every co-packer relationship:

  • Does the facility hold BRCGS certification at the level required by your target retailers?
  • Does it have experience producing your specific format and category?
  • What are the actual minimum order quantities — and do they match your launch volume plan?
  • What are the payment terms and production lead times?
  • Can it scale with you as volumes grow?
  • Does it have the specific equipment capability required for your formulation?

The correct sequence for a new drink brand entering UK retail in 2026 starts with premium independent health stores, Planet Organic, Whole Foods, farm shops, and premium delis. These environments attract adventurous, health-literate consumers who try new brands and generate the velocity data that grocery buyers require.

At Branding Innovations, our established co-packer relationships — built over 20 years — give founders direct access to vetted production partners with appropriate certification and specific category experience.

First production run cost guide 2026:

FormatTypical MOQIndicative First Run Cost
Glass bottles3,000–10,000 units£8,000–£20,000
Sleeved blank cans12,000–24,000 units£12,000–£30,000
Printed cans (full artwork)75,000+ units (print minimum)£35,000–£60,000+
PET bottles10,000–20,000 units£10,000–£25,000
Pouches/sachets5,000–10,000 units£5,000–£15,000

Step 7: Build Your Route to Market in the Right Sequence

The route to market sequence is one of the most consistently mismanaged aspects of entering the drinks industry. New brands approach national grocery too early, without sufficient commercial evidence, and waste the buyer relationship before it has a chance to develop.

Soft drinks buyers typically conduct range reviews in the first quarter of the year, January to March. Brands need to be fully prepared with sampling, branding, and a commercial pitch by January at the latest. Start approaching buyers at least six months before your target listing date to allow for their review cycles.

The proven route to market sequence for a new UK drink brand in 2026:

Phase 1 — DTC and local specialist. Your own website, local health food stores, gyms, delis, and farm shops. This phase builds proof of demand at manageable volumes and generates the first-party consumer data and sales velocity evidence that all subsequent buyer conversations depend on.

Phase 2 — Specialist retail. Planet Organic, Whole Foods, Holland & Barrett, Revital, and premium independents. These buyers actively seek new brands. They accept smaller initial volumes. They provide the credibility and the velocity data that national grocery requires.

Phase 3 — Convenience. Spar, Nisa, and independent convenience stores. The impulse purchase occasion is fundamental to drink brand trial. Convenience channel presence builds the habitual purchase pattern that sustains a drink brand commercially.

Phase 4 — National grocery. Tesco, Sainsbury’s, Waitrose, Ocado, M&S, ASDA. These conversations are built on the commercial evidence from phases one through three. A brand that arrives at a grocery buyer with six months of specialist retail velocity data, repeat purchase rates, and a clear gap-fill argument is in a completely different conversation from a brand arriving with a sample and a pitch deck.

At Branding Innovations, our buyer network of over 6,500 direct contacts built over 20 years of brand launches gives the brands we develop direct access to the decision-makers at every level of this route to market.

Step 8: Launch With Marketing That Converts, Not Just Reaches

If you are serious about launching a beverage startup, start with these immediate actions: define your target consumer and functional benefit with specificity; research ingredients and effective dosing for your chosen benefit; model your unit economics at different volume tiers; connect with potential co-packers to understand minimums and capabilities; and create a realistic budget and timeline for your launch.

The marketing launch plan for a new drink brand entering the industry in 2026:

Pre-launch (8–12 weeks before): Community building — authentic content documenting the brand’s development, a waitlist with a genuine value exchange, micro-influencer seeding to category-relevant audiences.

Launch week: PR outreach to food and drink journalists with a genuine story angle — not a product announcement. Sampling activations in the specific contexts where the target consumer is most receptive. Social content from real launch moments — the first retailer sighting, the first consumer reaction, the founder’s perspective.

Post-launch: Email marketing to the pre-built list. Sustained sampling in relevant channels. Trade press engagement for buyer audience visibility. Content that educates as much as it sells.

The most effective digital strategy for a new UK drink brand: authentic short-form video content is the highest-return marketing channel. Consistency matters far more than production quality. Post a minimum of four times per week before launch — building an audience before the product is available.

The HFSS advertising rules must shape every marketing decision. The legislation prohibits paid advertising of HFSS products online, including through influencer posts, videos, and stories. The ban came into effect on 5 January 2026. Confirm your product’s HFSS status at the Food Standards Agency before committing any paid marketing budget.

Step 9: Manage the Money With the Discipline the Industry Demands

A realistic minimum investment covering recipe development, branding, first production run, regulatory compliance, and six months of marketing is £50,000–£100,000. Brands that launch on less than this consistently struggle to reach critical mass before running out of resources. Budget for two years of trading before expecting meaningful profitability.

The realistic total investment for entering the drinks industry in 2026:

StageLow EndHigh End
Market research and concept validation£2,000£8,000
Recipe development and stability testing£8,000£22,000
Regulatory compliance£2,000£15,000+
Brand identity and packaging design£8,000£25,000
First production run£20,000£60,000
Year-one marketing and launch£5,000£20,000
Working capital reserve£5,000£15,000
Total£50,000£165,000+

The working capital reserve is non-negotiable. Retailers pay in 60 to 90 days after delivery. Production must be paid upfront. The cash gap between those two events destroys brands that are commercially performing. Protect your working capital with the same discipline you apply to your formulation.

Step 10: Be Honest About What You Do Not Know

Networking is key to surfacing the right partners — whether looking for someone to be an active part of brand development or help cover costs. Try to schedule calls or meetings with individuals whose experiences you can learn from, regardless of whether or not they are interested in investing right now.

The drinks industry has specific knowledge requirements that are not learnable from research alone. The regulatory landscape is complex and actively changing. The buyer relationship protocols are established and specific. The co-packer dynamics are commercially nuanced. The formulation science for functional drinks requires genuine expertise.

Branding Innovations’ vast hands-on experience and creative approach to brand design and strategy have already led to over 200 successful new brands being launched into the market. Their network leads to seamless manufacturing, fulfilment, and buyer relations — helping founders connect to the right partners at every stage.

The founders who succeed fastest are the ones who identify what they do not know, find the people who do know it, and invest in that expertise at the right stage. The cost of specialist support is consistently lower than the cost of the mistakes made without it.

The Complete Timeline: Entering the Drinks Industry in 2026

MonthKey Activity
Month 1–2Market research, concept validation, and  point of difference defined
Month 2–3Recipe development begins, ingredient regulatory screening
Month 3–4Prototype development, first taste testing, and stability testing initiated
Month 4–5Brand naming, trademark search, and visual identity development
Month 5–6Packaging design, regulatory label compliance review
Month 6–7Pilot production run, stability testing completed
Month 7–8Co-packer briefed, first production run ordered
Month 8–9DTC site built, pre-launch community building begins
Month 9–10First production run received, specialist retail buyer conversations
Month 10–12Launch — DTC live, specialist retail listings, PR and sampling
Month 12–18Build velocity data, approach convenience and national grocery

This timeline assumes no significant regulatory complications. Novel Foods assessments for specific ingredients can add 8 to 12 weeks. Build buffer time for the inevitable — supplier delays, design iterations, and production rescheduling are part of every launch journey.

What Brands That Enter the Drinks Industry Successfully Share

While trends, price, and margins all matter, the enjoyment of drink is the fundamental driver behind the industry. The brands that elevate social moments, bring joy, connection, and excitement to consumers’ lives — while delivering on their functional promise — are the ones that build lasting commercial value.

CharacteristicWhy It Determines Success
Specific, validated point of differenceConsumers and buyers know exactly why it exists
Formulation built for productionNo reformulation after first run — saves £15,000–£40,000
HFSS-compliant from the startFull marketing channel access in 2026
Brand built on strategy, not aestheticsPackaging converts in two seconds on any shelf
DTC before retailCommercial evidence built before buyer conversations
Specialist retail before groceryVelocity data is earned before it is needed
Working capital protectedGrowth does not kill the business that is performing
Expert support at every stageMistakes are prevented rather than paid for after the fact

FAQs: Steps for Entering the Drinks Industry With a New Brand

Q1: What is the first step for entering the drinks industry with a new brand? 

Market research specifically, confirming that the gap you believe exists is real, that the consumer you are targeting is underserved, and that your product has a specific, commercially ownable point of difference. Do this before spending a pound on formulation or branding.

Q2: How long does it take to enter the drinks industry with a new brand? 

A properly developed drink brand takes 9 to 18 months from initial concept to first retail-ready product. Novel Foods regulatory assessments, stability testing, and production lead times all have their own timelines that cannot be meaningfully compressed without increasing risk.

Q3: How much does it cost to enter the drinks industry with a new brand in 2026? 

A realistic minimum budget covering all stages from market research to first retail-ready product and six months of marketing is £50,000–£100,000. Brands that launch significantly less consistently run out of resources before reaching commercial sustainability.

Q4: What is the biggest mistake new brands make when entering the drinks industry? 

Approaching national grocery retailers before building commercial evidence through DTC and specialist retail channels. Grocery buyers require sales velocity data, repeat purchase evidence, and a credible commercial story. Arriving without these closes the buyer relationship before it has had a chance to open.

Q5: Do I need a specialist to enter the drinks industry successfully? 

The evidence consistently says yes. Regulatory compliance, formulation science, co-packer management, and buyer relationship protocols are all highly specific to this industry. The cost of specialist support is lower than the cost of the mistakes that founders without it consistently make.

Q6: How can Branding Innovations support the steps for entering the drinks industry? 

We manage every step from market research and formulation through regulatory compliance, brand development, co-packer sourcing, and direct buyer introductions through our network of 6,500 contacts. Book a free consultation to discuss your specific brand concept and timeline.

Final Thought

Entering the drinks industry with a new brand in 2026 is genuinely one of the most exciting commercial journeys available to an entrepreneur. The opportunity is real. The market is growing. The consumer is actively seeking the kinds of brands that a well-prepared, well-positioned new entrant can build.

It is a process, a sequenced, disciplined, expertly supported process that begins with honest market research and ends with a product on the shelf that consumers genuinely love. The UK drinks market in 2026 simultaneously rewards preparation, product quality, and professional execution. The brands being built right now with the right recipe, the right brand, and the right commercial strategy will be the category leaders of the years ahead.

At Branding Innovations, we have been navigating these steps with founders for 20+ years. If you are ready to enter the drinks industry and want a partner who has genuinely done this before, book a free consultation with us today.

Read our Book for Guidance

Richard Horwell is the Managing Director of Branding Innovations, a London-based drink development and branding agency. He has over 30 years of FMCG experience across the UK, USA, Australia, and the Middle East, and has been behind the development of more than 200 food and drink brands worldwide. For specialist guidance on product development and brand development, contact the Branding Innovations team today.